Filtration & separation

Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 3
No results were found for the filter!
Centrifuge CF-5 Mini 5500rpm with rotors - DH.WCF00005
Centrifuge CF-5 Mini 5500rpm with rotors

Ideal for:

  • plasmid, DNA and RNA work, miniprep kit, and many other applications

 

Features:

  • quick spin down from walls or caps of centrifuge tubes
  • complete set with circular fixed-angle rotor and fixed strip rotor
  • smooth opening of the lid by simply pressing
  • body and rotor made of ABS
  • clear and transparent lid (polycarbonate)
  • CE/GMP certified and unique serial number for tracing

 

Safety mechanism:

  • lid-activated on/off safety switch: close the clear lid to start and open to stop

 

Controller:

  • superior linearity for the control of stirring speed by specially designed control circuit (PWM control)

 

Centrifuge CF-10 High-Performance 13500rpm with rotors - DH.WCF00010
Centrifuge CF-10 High-Performance 13500rpm with rotors

Ideal for:

  • plasmid, DNA and RNA work, protein work, and miniprep kit, cell culture, cell harvesting, sub-cellular separations, and many other applications

 

Features:

  • direct driven brushless DC motor, quiet operation (? 57 dB)
  • air cooling system
  • digital feedback speed control
  • useful exclusive spin down function
  • rotor lid for running and reducing noise
  • realize extremely compact design with small footprint
  • acceleration & braking times lower than 15 sec (max. speed)
  • storage function for the set values: RPM & time
  • simple operation for repetitive use of spin down function
  • body made of ABS, rotor made of PE, lid made of PC
  • backlight LCD display
  • CE/GMP certified and unique serial number for tracing

 

Safety mechanism:

  • safety system for motor error
  • safety electronic lid lock system during running

 

Controller:

  • digital feedback control with Jog-Shuttle-switch (turn + push)

 

Centrifuge Accessories
Centrifuge Accessories

Artikelliste

Order number Model Version Material Ideal for Packaging unit Packing size
DH.WCF00100 CFAR1512 rund, fix geneigt 12 x 0.2/0.5/1.5/2.0ml tubes 175 x 255 x 215 mm
DH.WCF00205 CFPR8 Fixed strip rotor 2 x 0.2 ml PCR stripes 8-times or 16 x 0.2 ml PCR tubes 175 x 255 x 215 mm
DH.WCF00201 CFTA3 Fixed angle rotor, 0.2 ml tubes 6 pcs.
DH.WCF00301 CFTA5 Fixed angle rotor, 0.5 ml tubes 6 pcs.
DH.WCF21350 Optional inner lid PP sample protection from contamination
DH.WCF11350 Rotor autoclavable for 12 x 0.2/0.5/1.5/2.0 ml tubes
DH.WCF00200 CFTA1 Fixed angle rotor, 0.2 ml tubes 12 pcs.
DH.WCF00300 CFTA2 Fixed angle rotor, 0.5 ml tubes 12 pcs.
Rotary evaporator witegvapor diagonal or vertical 180°C 20-280rpm 30-5000ml
Rotary evaporator witegvapor diagonal or vertical 180°C 20-280rpm 30-5000ml

Ideal for:

  • all distilling applications with high vacuum pressure

 

Features:

  • special glassware for greaseless usage
  • diagonal and vertical model
  • digital display
  • for flasks from 50 - 3,000 ml
  • speed range from 20 - 280 rpm
  • easy height control by accurate motor with up/down buttons
  • double-binding PTFE and NBR nitrile vacuum seal
  • anti-abrasion, anti-aging, anti-chemical
  • leaning angle can be adjusted
  • included water bath is made of stainless steel

 

Safety mechanism:

  • insulated heater
  • double-jacketed bath body
  • low water level detection and automatic stop function

 

Controller:

  • built-in digital controller with LCD display

 

Artikelliste

Order number Model Height (inner) Diameter (inner) Width (Outer) Length (outer) Height (outer) Material Ideal for Speed Temperature range Packing size
2 600 000 witegvapor diagonal 120 mm Ø245 mm 730 mm 410 mm 630 mm Bath: stainless steel SUS304 Flasks from 50 to 3000 ml 20 - 280 rpm up to 180°C 800 x 600 x 600 mm
2 610 000 witegvapor vertical 120 mm Ø245 mm 620 mm 410 mm 870 mm Bath: stainless steel SUS304 Flasks from 50 to 3000 ml 20 - 280 rpm up to 180°C 800 x 600 x 600 mm
Rotary evaporator Accessories and spare parts
Rotary evaporator Accessories and spare parts

Artikelliste

Order number Model Version Length (outer) Form Thread Cone (ST) Synthetic coating Material Ideal for Packaging unit Socket (ST) Capacity Socket
0 131 329 Joint clamp POM Evaporator witegvapor 10 pcs. ST 29/32 - 29/42
2 600 0072 witegvapor duct 200 mm ST 24/29 Glass Evaporator witegvapor
2 600 040 Duct screw cap Evaporator witegvapor
2 600 041 Condenser screw coupling Evaporator witegvapor
2 600 042 Condenser holder spring Evaporator witegvapor
2 600 018 Vacuum seal Evaporator witegvapor
2 600 009 Assembly condenser 1200 cm2 coiling surface SVS-tubing connection GL14 Evaporator witegvapor
2 600 044 Vacuum connector Evaporator witegvapor
2 600 010 Vacuum stopcock with PTFE-tube Evaporator witegvapor
2 600 019 Drawing PTFE hose Evaporator witegvapor
2 600 020 Inner temperature sensor Evaporator witegvapor (mounting on cooler)
0 644 500 ROT Receiver flask Rotulex KS 35/20 round no borosilicate glass 3.3 Evaporator witegvapor 500 ml
0 133 035 Receiving flask clamp with screw, KS 35/20 Spherical joints
2 600 045 Stopper ST 29 Evaporator
2 600 0071 TEF witegvapor duct 312 mm ST 24/29 PTFE Evaporator witegvapor
2 600 0072 TEF witegvapor duct 200 mm PTFE Evaporator witegvapor
2 600 0071 witegvapor duct 312 mm Glass Evaporator witegvapor
1 430 400 Four neckbulb 4 times 4 x ST 14 Flasks ST 24
0 510 002 Expansion adapter ST 14/23 ST 24/29
0 510 006 Expansion adapter ST 24/29 ST 29/32
1 430 224 Anti-foaming trap 100 mm ST 24/29 Flasks ST 24/29 250 ml
1 430 230 Anti-foaming trap 250 mm ST 25 Flasks ST 25
1 430 190 Anti-foaming trap 100 mm ST 29 Flasks ST 29
1 430 200 Anti-foaming trap PRECISO 250 mm ST 29/32 made of DURAN® tubing rotary evaporator safety trap, 500 ml flask ST 29/32
0 644 100 ROT Receiver flask KS35 Rotulex 100 ml
0 644 250 ROT Receiver flask KS35 Rotulex 250 ml
0 644 001 ROT Receiver flask KS35 Rotulex 1000 ml
0 644 002 ROT Receiver flask KS35 Rotulex 2000 ml
0 644 003 ROT Receiver flask KS35 Rotulex 3000 ml
0 655 050 FCH-V Evaporating flask pear shaped ST 29/32 50 ml
0 655 100 FCH-V Evaporating flask pear shaped ST 29/32 100 ml
0 655 250 FCH-V Evaporating flask pear shaped ST 29/32 250 ml
0 655 500 FCH-V Evaporating flask pear shaped ST 29/32 500 ml
0 655 001 FCH-V Evaporating flask pear shaped ST 29/32 1000 ml
0 655 002 FCH-V Evaporating flask pear shaped ST 29/32 2000 ml
0 655 003 FCH-V Evaporating flask pear shaped ST 29/32 3000 ml
Filter holder VF3 / VF5 / VF6 / VF7 / VF8 / VF16 made of glass Ø25mm / Ø47mm / Ø90mm
Filter holder VF3 / VF5 / VF6 / VF7 / VF8 / VF16 made of glass Ø25mm / Ø47mm / Ø90mm

VF5 & VF8 Ø25mm
Ideal for:

  • small volume vacuum filtration for biological or particulate contamination analysis

 

VF6 & VF7 Ø47mm
Ideal for:

  • solvent purification and general filtration for microbiology, suspended solid analysis etc.

 

VF3 & VF16 Ø47mm / Ø90mm
Ideal for:

  • purification of organic, corrosive liquid such as solvent, mobile phase for HPLC, GC and AA analysis

 

Artikelliste

Order number Model Version Diameter (outer) Material Ideal for Capacity Stopper
00829 167200-05 VF5 filtration set, complete with receiver flask Filter: Ø25 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, support base: borosilicate glass; stopper: silicone; receiver flask: borosilicate glass Small volume vacuum filtration for biological or particulate contamination analysts Funnel: 15 ml, receiver flask: 125 ml No. 5
00829 167120-32 VF5 filtration set, filter holder without receiver flask Filter: Ø25 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, support base: borosilicate glass; stopper: silicone Small volume vacuum filtration for biological or particulate contamination analysts Funnel: 15 ml No. 5
00829 167200-08 VF8 filtration set, complete with receiver flask Filter: Ø25 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, support screen: stainless steel, gasket: PTFE; support base: borosilicate glass; stopper: silicone; receiver flask: borosilicate glass Small volume vacuum filtration for biological or particulate contamination analysts Funnel: 15 ml, receiver flask: 125 ml No. 5
00829 167120-34 VF8 filtration set, filter holder without receiver flask Filter: Ø25 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, support screen: stainless steel, gasket: PTFE; support base: borosilicate glass; stopper: silicone Small volume vacuum filtration for biological or particulate contamination analysts Funnel: 15 ml No. 5
00829 167200-06 VF6 filtration set, complete with receiver flask Filter: Ø47 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, support base: borosilicate glass; stopper: silicone; receiver flask: borosilicate glass; fixing sucker: silicone Solvent purification and general filtration for microbiology, suspended solid analysis etc. Funnel: 300 ml, receiver flask: 1000 ml No. 8
00829 167120-31 VF6 filtration set, filter holder without receiver flask and fixing sucker Filter: Ø47 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, support base: borosilicate glass; stopper: silicone Solvent purification and general filtration for microbiology, suspended solid analysis etc. Funnel: 300 ml No. 8
00829 167200-07 VF7 filtration set, complete with receiver flask and fixing sucker Filter: Ø47 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, support screen: stainless steel, gasket: PTFE; support base: borosilicate glass; stopper: silicone; receiver flask: borosilicate glass; fixing sucker: silicone Solvent purification and general filtration for microbiology, suspended solid analysis etc. Funnel: 300 ml, receiver flask: 1000 ml No. 8
00829 167120-33 VF7 filtration set , filter holder without receiver flask and fixing sucker Filter: Ø47 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, support screen: stainless steel, gasket: PTFE; support base: borosilicate glass; stopper: silicone Solvent purification and general filtration for microbiology, suspended solid analysis etc. Funnel: 300 ml No. 8
00829 167200-03 VF3 filtration set, complete with receiver flask and fixing sucker Filter: Ø47 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, suction cap: borosilicate glass; receiver flask: borosilicate glass; fixing sucker: silicone Purification of organic, corrosive liquid such as solvent (mobile phase) for HPLC analysis Funnel: 300 ml, receiver flask: 1000 ml
00829 167120-30 VF3 filtration set, filter holder without receiver flask and fixing sucker Filter: Ø47 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, suction cap: borosilicate glass Purification of organic, corrosive liquid such as solvent (mobile phase) for HPLC analysis Funnel: 300 ml
00829 167200-16 VF16 filtration set, complete with receiver flask Filter: Ø90 mm Filter: borosilicate glass; funnel: borosilicate glass; clamp: anodized aluminium, support screen: PTFE coated; gasket: PTFE; suction cap: borosilicate glass; receiver flask: borosilicate glass Purification of organic, corrosive liquid such as solvent, mobile phase for HPLC, GC and AA analysis Funnel: 1000 ml, receiver flask: 5000 ml
Filter holder SF52 made fo stainless steel Ø47mm
Filter holder SF52 made fo stainless steel Ø47mm

SF52 Ø47mm
Ideal for:

  • filtration requiring the sterilization such as microbiology test or use for purification of corrosive liquid, solvent, etc.

 

Artikelliste

Order number Model Version Diameter (outer) Material Ideal for Connections Capacity Stopper
00829 180100-50 SF52 filtration set, filter holder without receiver flask Filter: Ø47 mm Filter: stainless steel; funnel: stainless steel; support screen: stainless steel; support base: stainless steel; stopper: silicone Filtration requiring the sterilization such as microbiology test or use for purification of corrosive liquid, solvent, etc. Spin-lock connection Funnel: 500 ml No. 18
00829 167200-11 VF11 filtration set, complete with receiver flask Filter: Ø47 mm Filter: stainless steel; funnel: stainless steel; support screen: stainless steel; support base: stainless steel; stopper: silicone; Receiver flask: borosilicate glass Filtration requiring the sterilization such as microbiology test or use for purification of corrosive liquid, solvent, etc. Spin-lock connection Funnel: 500 ml, receiver flask: 2000 ml No. 18
Filter holder LF30 / LF31 / LF3 / LF5 /LF3a / LF5a / MF3 / MF3a / MF5 / MF5a made of PES Ø47mm
Filter holder LF30 / LF31 / LF3 / LF5 /LF3a / LF5a / MF3 / MF3a / MF5 / MF5a made of PES Ø47mm

LF30 & LF31 Ø47mm
Features:

  • spin-lock connection facilitates fast and stable installation without clamp
  • excellent smash and high temperature resistance
  • autoclavable
  • built-in overflow protection to keep the filtrate from overflowing when waste bottle is full
  • funnel graduated in 50ml, receiver in 100ml increments for easy measurement

 

LF 3 / 5 & LF 3a / 5a Ø47mm
Features:

  • spin-lock connection facilitates fast and stable installation without clamp
  • PES structure offers excellent smash and high temperature resistance (up to 180°C)
  • autoclavable
  • reusable
  • funnel graduated in 50ml increments for easy measurement

 

MF 3 / 5 & MF 3a / 5a Ø47mm
Features:

  • magnetic connection facilitates fast and stable installation without clamp
  • strong magnetic seal allows one-handed operation, prevents possible twisting and tearing of the membrane
  • membrane guide on the base helps positioning membrane easily
  • PES structure offers excellent smash and high temperature resistance (up to 180°C)
  • funnel graduated in 50ml increments for easy measurement
  • autoclavable
  • reusable

 

Artikelliste

Order number Model Version Diameter (outer) Filter Thread Material Ideal for Connections Capacity Stopper
00829 197000-01 LF 30 PES filtration set, filter holder without PC waste bottle with cover Filter: Ø47 mm 25 mm, 0.2 μm Filter holder: PES; filter: PTFE; lid kit: PP, funnel: PES; support screen: PP; support base: PC; stopper: silicone Spin-lock connection Funnel: 300 ml No. 16
00829 197000-03 LF 5 PES filter holder, complete without lid kit Filter: Ø47 mm 25 mm, 0.2 μm Filter: PTFE; funnel: PES; support screen: PP; support base: PC; stopper: silicone Spin-lock connection Funnel: 500 ml No. 16
00829 197000-02 LF 3a PES filter holder, complete with lid kit Filter: Ø47 mm 25 mm, 0.2 μm Bottle adapter: GL45 Filter: PTFE; lid kit: PP, silicone; funnel: PES; support screen: PP Spin-lock connection Funnel: 300 ml
00829 197000-04 LF 5a PES filter holder, complete without lid kit Filter: Ø47 mm 25 mm, 0.2 μm Bottle adapter: GL45 Filter: PTFE; funnel: PES; support screen: PP Spin-lock connection Funnel: 500 ml
00829 200300-01 MF3 Filter holder with long stem Filter: Ø47 mm Lid kit: PP, funnel: PES; support base: PES, stopper: silicone Can be used for WaterVac100 with stopper design Funnel: 300 ml No. 8
00829 200500-01 MF5 Filter holder with long stem Filter: Ø47 mm Lid kit: PP, funnel: PES; support base: PES, stopper: silicone Can be used for WaterVac100 with stopper design Funnel: 500 ml No. 8
00829 200310-01 MF 3a Filter holder with short stem Filter: Ø47 mm Lid kit: PP, funnel: PES; support base: PP Funnel: 300 ml
00829 200510-01 MF 5a Filter holder with short stem Filter: Ø47 mm Lid kit: PP, funnel: PES; support base: PP Funnel: 500 ml
00829 197010-30 LF 30 PES filtration set, complete with PC waste bottle with cover Filter: Ø47 mm 25 mm, 0.2 μm Filter holder: PES; filter: PTFE; lid kit: PP, funnel: PES; support screen: PP; support base: PC; stopper: silicone; cap: PP; cover: PC; waste bottle: PC Spin-lock connection Funnel: 300 ml, receiver flask: 1200 ml No. 16
00829 197010-31 LF 31 PES filtration set, complete with receiver flask and fixing sucker Filter: Ø47 mm 25 mm, 0.2 μm Filter holder: PES; filter: PTFE; lid kit: PP, funnel: PES; support screen: PP; support base: PC; stopper: silicone;receiver flask: borosilicate glass; fixing sucker: silicone Spin-lock connection Funnel: 300 ml, receiver flask: 1000 ml No. 16
Filter holder SF10 / SF30 / filter holder made from stainless steel Ø47mm
Filter holder SF10 / SF30 / filter holder made from stainless steel Ø47mm

SF10 & SF30 Ø47mm
Ideal for:

  • spin-lock connection facilitates fast and stable installation without clamp
  • stainless steel funnel offers excellent chemical resistance and can be sterilized
  • built-in overflow protection to keep the filtrate from overflowing when waste bottle is full

 

Artikelliste

Order number Model Version Diameter (outer) Material Ideal for Connections Capacity Stopper
00829 197010-32 SF10 filtration set, complete with PC waste bottle with cover Filter: Ø47 mm Filter: stainless steel; funnel: stainless steel; support screen: stainless steel; support base: stainless steel; stopper: silicone; cap: PP; cover PC; waste bottle: PC SF-Spin-lock connection Funnel: 100 ml, receiver flask: 1200 ml No. 16
00829 197010-33 SF30 filtration set, complete with PC waste bottle with cover Filter: Ø47 mm Filter: stainless steel; funnel: stainless steel; support screen: stainless steel; support base: stainless steel; stopper: silicone; cap: PP; cover PC; waste bottle: PC SF-Spin-lock connection Funnel: 300 ml, receiver flask: 1200 ml No. 16
00829 180100-11 Stainless steel lids 100ml filter holder
00829 180100-13 Stainless steel lids 300 ml filter holder
Vacuum filtration system WaterVac 100 -540mmg with integrated vacuum pump
Vacuum filtration system WaterVac 100 -540mmg with integrated vacuum pump

Ideal for:

  • microbiological filtration technique for analyzing aqueous-based fluids for microbiological contamination
  • suspended solid test for municipal, surface, ground and drinking water
  • general filtration without the need of collecting filtrate

Features:

  • -540 mmHg
  • up to 0,5 l/min (liquid) or 2,2 l/min (air)
  • integrated vacuum pump
  • compact design - ideal for work benches or laminar flow hoods
  • no special suction flask or waste bottle is needed
  • available with spin-lock or stopper design
  • one push-button for easy operation
  • silicone tube (2m) for waste drain included

Artikelliste

Order number Model Version Width (Outer) Length (outer) Height (outer) Diameter (outer) Material Ideal for Connections Vacuum range
00829 190110-02 MultiVac 100 spin-lock with spin-lock 120 mm 170 mm 96 mm Filter: Ø47 mm / 50 mm Housing: SUS 304; valve plate: EPDM; diaphragm: EPDM; inlet / outlet port: SUS 316; O-ring: FKM; tube: silicone Microbiological filtration technique for analysing aqueous-based fluids for microbiological contamination, suspended solid test for municipal, surface, ground and drinking water, general filtration without the need of collection filtrate EU-plug max. -540 mmHg
00829 190120-02 120 mm Filter: ?47 mm / 50 mm EU-Anschluss Max. -540 mmHg
Microplate manifold WelVac 200 with accessories
Microplate manifold WelVac 200 with accessories

Ideal for:

  • DNA purification
  • RNA purification
  • gel purification
  • PCR clean-up

 

Features:

  • designed to replace traditional centrifuges with vacuum source to simplify purification process of:
    • plasmid DNA
    • single-stranded phage DNA, RNA
    • genomic DNA
    • viral nucleic acids from PCR
    • other enzymatic reactions
  • rapid continuous sample purification without centrifugation
  • multi-use due to different adapter boards
  • compatible with various kinds of centrifuge tubes and 96 well micro filter plates

 

Artikelliste

Order number Model Version Width (inner) Length (inner) Height (inner) Width (Outer) Length (outer) Height (outer) Material Ideal for Connections Pump performance
00829 195200-00 WelVac 200 unit only 8.6 cm 12.8 cm 7.3 cm 12.4 cm 23.3 cm 10.2 cm Vacuum manifold: anodized aluminium; gasket: rubber; O-ring: rubber; column adaptor: PC; Luer connector: silicone; Luer stopper: silicone DNA purification, RNA purification, gel purification, PCR clean-up 5/16 inch (8 mm) 23 l/min, -680 mmHg
00829 195210-22 Rocker 300 & WelVac 200 230 V Rocker 300 230V, WelVac 200, disc filter, silicone tube (30 cm) DNA purification, RNA purification, gel purification, PCR clean-up 20 l/min, -680 mmHg
Manifold MultiVac X10-MS, with 3 or 6 places, aluminium with stopper connections
Manifold MultiVac X10-MS, with 3 or 6 places, aluminium with stopper connections

Ideal for:

  • filtration for microbiology tests
  • chemistry experiments
  • general laboratory filtration

 

Features:

  • MultiVac 310-MS is made of anodized aluminium
  • includes 3x silicone stopper No. 8 to fit various types of filter holder
  • each branch permits individual control
  • quick-fit hose barb can be connected to both sides

 

Artikelliste

Order number Model Version Width (Outer) Length (outer) Height (outer) Material Ideal for Connections Stopper
00829 180610-01 MultiVac 610-MS 6 branches 85 cm 13 cm 16 cm Body, control valve, handle, hose barb: anodized aluminium; stopper: silicone Filtration for microbiology tests, chemistry experiments, general laboratory filtration 5/16 inch (8 mm) No. 8
00829 180310-01 MultiVac 310-MS 3 branches 48 cm 13 cm 16 cm Body, control valve, handle, hose barb: anodized aluminium; stopper: silicone Filtration for microbiology tests, chemistry experiments, general laboratory filtration 5/16 inch (8 mm) No. 8
Manifold MultiVac 300-MS/600-MS 3/6 places stainless steel with stopper connections
Manifold MultiVac 300-MS/600-MS 3/6 places stainless steel with stopper connections

Ideal for:

  • filtration for microbiology tests
  • chemistry experiments
  • general laboratory filtration

 

Features:

  • MultiVac MS is made of anodized aluminium and stainless steel
  • includes silicone stopper No. 8 to fit various types of filter holder
  • each branch permits individual control
  • adjustable vent valve design helps to drain residual liquid off the tube
  • innovative vent valve design prevents from water hammer phenomenon
  • quick-fit hose barb can be connected to both sides

 

Artikelliste

Order number Model Version Width (Outer) Length (outer) Height (outer) Diameter (outer) Material Ideal for Connections Capacity Stopper
00829 180300-01 MultiVac 300-MS 3 branches 48 cm 13 cm 11 cm Filter: Ø47 mm / 50 mm Body, control valve, filter funnel, funnel support base: stainless steel SUS316; control valve, handle: anodized aluminium; stopper: silicone Filtration for microbiology tests, chemistry experiments, general laboratory filtration 5/16 inch (8 mm) possible funnel capacity: 100ml / 300 ml / 500 ml No. 8
00829 180600-01 MultiVac 600-MS 6 branches 85 cm 13 cm 11 cm Filter: Ø47 mm / 50 mm Body, control valve, filter funnel, funnel support base: stainless steel SUS316; control valve, handle: anodized aluminium; stopper: silicone Filtration for microbiology tests, chemistry experiments, general laboratory filtration 5/16 inch (8 mm) possible funnel capacity: 100ml / 300 ml / 500 ml No. 8
Manifold MultiVac 300-MB/600-MB 3/6 places stainless steel with spin-lock for stainless steel funnels
Manifold MultiVac 300-MB/600-MB 3/6 places stainless steel with spin-lock for stainless steel funnels

Ideal for:

  • filtration for microbiology tests
  • chemistry experiments
  • general laboratory filtration

 

Features:

  • MultiVac MB is made of anodized aluminium and stainless steel
  • compatible with different sizes of funnels
  • each branch permits individual control
  • adjustable vent valve design helps to drain residual liquid off the tube
  • innovative vent valve design prevents from water hammer phenomenon
  • quick-fit hose barb can be connected to both sides

 

Artikelliste

Order number Model Version Width (Outer) Length (outer) Height (outer) Diameter (outer) Material Ideal for Connections Capacity Stopper
00829 180300-02 MultiVac 300-MB 3 branches 48 cm 13 cm 11 cm Filter: Ø47 mm / 50 mm Body, control valve, filter funnel, funnel support base: stainless steel SS316; control valve, handle: anodized aluminium; stopper: silicone Filtration for microbiology tests, chemistry experiments, general laboratory filtration 5/16 inch (8 mm), Spin-lock connection possible funnel capacity: 100ml / 300 ml / 500 ml No. 8
00829 180600-02 MultiVac 600-MB 6 branches 85 cm 13 cm 11 cm Filter: Ø47 mm / 50 mm Body, control valve, filter funnel, funnel support base: stainless steel SS316; control valve, handle: anodized aluminium; stopper: silicone Filtration for microbiology tests, chemistry experiments, general laboratory filtration 5/16 inch (8 mm), Spin-lock connection SF type possible funnel capacity: 100ml / 300 ml / 500 ml No. 8
Manifold Sets with vacuum pumps and waste bottles
MultiVac 310-MS-T

MultiVac 310-MS-T
Ideal for

  • filtration for suspended solid test
  • filtration for microbiology test
  • general laboratory filtration

 

MultiVac 301-MB-T
Ideal for

  • filtration for microbiology test
  • chemical experiments
  • general laboratory filtration

 

MultiVac 601-MB-T
Ideal for

  • filtration for microbiology test
  • chemical experiments
  • general laboratory filtration

 

Artikelliste

Order number Model Version Material Ideal for Connections Capacity Pump performance
00829 180311-22-T MultiVac 310-MS-T 230 V Oil free vacuum pump Rocker 400 230 V, anodized aluminium maifold MultiVac 310-MS, 3 places with stopper, 3 x magnetic PES filter holder 300 ml, waste bottle PP 4000 ml, silicone tube (2m) Waste bottle: PP, tube: silicone, filter holder: PES, manifold: anodized aluminium Filtration for suspended solid test, filtration for microbiology test, general laboratory filtration Funnel with magnetic connections Filter holder: 300 ml; waste bottle: 4000 ml 37 l/min, -670 mmHg
00829 180300-22-T MultiVac 301-MB-T 230 V Oil free vacuum pump Rocker 400 230 V, manifold MultiVac 301-MB, 3 places spin-lock, 3 x stainless steel filter funnel 100 ml, waste bottel PP 4000 ml, torch burner, MCE membrane, 47 mm, 0.45 μm, 200 pcs./PK, silicone tube (2 m) Waste bottle: PP, tube: silicone, filter holder: stainless steel Filtration for microbiology tests, chemical experiments, general laboratory filtration Funnel with spin-lock connections Filter holder: 100 ml; waste bottle: 4000 ml 34 l/min, -680 mmHg
00829 180600-22-T MultiVac 600-MB-T 230 V Oil free vacuum pump Rocker 400 230 V, manifold MultiVac 601-MB, 6 places spin-lock, 6 x stainless steel filter funnel 100 ml, waste bottle PP 4000 ml, torch burner, MCE membrane, 47 mm, 0.45 μm, 200 pcs./PK, silicone tube (2 m) Waste bottle: PP, tube: silicone, filter holder: stainless steel Filtration for microbiology tests, chemical experiments, general laboratory filtration Funnel with spin-lock connections Filter holder: 100 ml; waste bottle: 4000 ml 34 l/min, -680 mmHg
Suction system Lafil 100 -500mmHg 1L/min
Suction system Lafil 100 -500mmHg 1L/min

Ideal for:

  • cell culture aspiration
  • laboratory waste suction

 

Features:

  • -500 mmHg
  • 1 l/min
  • dual function system: suction and filtration
  • ideal for operation in laminar flow
  • all fittings are made of POM (autoclavable)
  • CE certified

 

Artikelliste

Order number Model Version Width (Outer) Length (outer) Height (outer) Thread Material Ideal for Packaging unit Connections Vessel capacity Vacuum range Flow rate
00829 197100-02 Lafil 100 100-240V DC brushless motor 13 cm 26.5 cm 21 cm Suction cap GL45 Case: ABS, handle: POM, channel tip adaptor: POM, GL45 suction cap: PP, bottle: borosilicate glass Cell culture aspiration, laboratory waste suction EU-plug 500 ml max. -500 mmHg 1,0 l/Min
00829 197100-01 Lafil 100 100-240V DC brushless motor 13 cm 26.5 cm 21 cm Suction cap GL45 Case: ABS, handle: POM, channel tip adaptor: POM, GL45 suction cap: PP, bottle: borosilicate glass Cell culture aspiration, laboratory waste suction US-plug 500 ml max. -500 mmHg 1,0 l/Min
00829 197000-60 Suction cap GL45 PP 10 pcs. (I.D. tubing) 3/16 inch (5 mm)
Universal suction kit BioDolphin universal kit with adapters
Universal suction kit BioDolphin universal kit with adapters

Ideal for:

  • cell culture aspiration
  • laboratory waste suction

Features:

  • user-friendly
  • continuous suction without pressing the button
  • quick connection between fitting and handle
  • storage rack to keep order
  • built-in liquid collecting tray
  • autoclavable (except storage rack)

Artikelliste

Order number Model Version Width (Outer) Length (outer) Height (outer) Material Ideal for Connections
00829 199100-00 BioDolphin complete kit Press to suck 15 cm 15.2 cm 14.5 cm Cell culture aspiration, laboratory waste suction 3/16 inch (5 mm)
00829 199100-30 BioDolphin handle POM Universal suction kit BioDolphin, portable suction system BioVac Plus
00829 199100-61 BioDolphin rack Universal suction kit BioDolphin
00829 199100-48 BioDolphin 1-Channel adapter (80 mm) 80 mm Stainless steel, POM Universal suction kit BioDolphin
00829 199100-47 BioDolphin 1-Channel adapter (40 mm) 40 mm Stainless steel, POM Universal suction kit BioDolphin
00829 199100-46 BioDolphin 1-Channel adapter POM Universal suction kit BioDolphin
00829 199100-49 BioDolphin 8-Channel adapter (40 mm) 40 mm Stainless steel, POM Universal suction kit BioDolphin
00829 199100-50 8-Channel adapter with ejector with ejector POM Universal suction kit BioDolphin, portable suction system BioVac Plus
00829 199100-75 1-Channel adapter with ejector with ejector POM Universal suction kit BioDolphin, portable suction systemBioVac Plus
Filter holder Sets with vacuum pumps
Filter holder Sets with vacuum pumps

Rocker 300 & LF30

  • general filtration in laboratories
  • suspended solid test
  • microbiological tests


Rocker 300 & MF31

  • general filtration in laboratories
  • suspended solid test
  • microbiological tests


Rocker 300C & VF12

  • purification of organic, corrosive liquids such as solvent (mobile phase) for HPLC analysis


Chemker 300 & VF12

  • purification of organic, corrosive liquids such as solvent (mobile phase) for HPLC analysis

Artikelliste

Order number Model Version Material Ideal for Connections Capacity Pump performance
00829 167305-22 Rocker 300 & LF30 230 V Oil free vacuum pump Rocker 300 230 V, filtration set LF30, silicone tube (1m) Waste bottle: PC; funnel: PES General filtration in laboratories, air sampling, suspended solid test Spin-lock connection Funnel: 300 ml, receiver flask: 1200 ml 20 l/min, 106 mbar
00829 167311-22 Rocker 300 & MF31 230 V Oil free vacuum pump Rocker 300 230 V, filtration set MF31, silicone tube (1m) Receiver flask: PC; funnel: PES General filtration in laboratories, air sampling, suspended solid test magnetic connections Funnel: 300 ml, receiver flask: 1000 ml 20 l/min, 173 mbar
00829 189302-22 Rocker 300 & VF12 230 V Oil free vacuum pump Rocker 300 230 V, filtration set VF12, silicone tube (1m) Receiver flask: glass; funnel: glass Purification of organic, corrosive liquids such as solvent (mobile phase) for HPLC analysis Aluminium clamp connection Funnel: 300 ml, receiver flask: 1000 ml 20 l/min, 173 mbar
00829 169302-22 Chemker 300 & VF12 230 V Chemical-resistant vacuum pump Chemker 300 230 V, filtration set VF12, silicone tube (1m) Receiver flask: glass; funnel: glass Purification of organic, corrosive liquids such as solvent (mobile phase) for HPLC analysis Aluminium clamp connection Funnel: 300 ml, receiver flask: 1000 ml 18 l/min, 120 mbar
Vacuum filtration system Lafil 400 22/25L/min -720mmHg with integrated vacuum pump
Vacuum filtration system Lafil 400 22/25L/min -720mmHg with integrated vacuum pump

Ideal for:

  • filtration for microbiology tests
  • suspended solid tests
  • general laboratory filtration
  • vacuum filtration
  • cell culture aspiration
  • laboratory waste suction

 

Features:

  • -720 mmHg
  • up to 25 l/min
  • combines vacuum source with filtration accessories
  • compact design
  • different sets available
  • CE certified

 

Artikelliste

Order number Model Width (Outer) Length (outer) Height (outer) Diameter (outer) Filter Material Ideal for Power supply Connections Speed Capacity Vacuum range Accessories Flow rate
00829 197400-22 Lafil 400 230V 23 mm 33.5 mm 45 cm Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction Current 0.4 A 5/16 inch (8 mm) Motor ration: 1450 rpm max. 33 mbar 25 l/Min
00829 197401-22 Lafil 400 230V with LF 30 23 mm 33.5 mm 45 cm Filter: Ø47 mm Filter: 25 mm, 0.2 μm Filter funnel: PES; waste bottle: PC; funnel support base: PP; funnel lid: PP (containing PTFE syringe filter); overflow protection: PP Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction Current 0.4 A 5/16 inch (8 mm) Motor ration: 1450 rpm Funnel: 300 ml, waste bottle: 1200 ml max. -720 mmHg 22 l/Min
00829 197402-22 Lafil 400 230V with SF10 23 mm 33.5 mm 45 cm Filter: Ø47 mm Filter funnel: stainless steel SUS316; waste bottle: PC; funnel support base: stainless steel SUS316; overflow protection: PP Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction Current 0.4 A 5/16 inch (8 mm) Motor ration: 1450 rpm Funnel: 100 ml, waste bottle: 1200 ml max. -720 mmHg 22 l/Min
00829 197404-22 Lafil 400 230V with LF 5a 23 mm 33.5 mm 45 cm Filter: Ø47 mm Filter funnel: PES; tissue bottle: borosilicate glass; funnel support base: PP Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction Current 0.4 A 5/16 inch (8 mm) Motor ration: 1450 rpm Funnel: 500 ml, bottle: 500 ml max. -720 mmHg 22 l/Min
00829 197405-22 Lafil 400 plus 230V Suction bottle: PC; 1-channel tip adaptor with ejector: POM; 8-channel tip adaptor with ejector: POM; 1-channel tip adaptor (150 mm): POM Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction Suction bottle: 1200 ml max. -540 mmHg Handle, 1-channel tip adaptor and 8-channel tip adaptor
Suction system BioVac 225/240 max. vacuum -720 mmHg, flow rate 38 l/min - 00829 167225-22
 Suction system BioVac 225/240 max. vacuum -720 mmHg, flow rate 38 l/min

Ideal for:

  • cell culture aspiration
  • laboratory waste suction

 

Technische Merkmale:

  • up to -720 mmHg
  • up to 38 l/min
  • diaphragm (BioVac 225) or piston (BioVac 240) pump
  • overflow protection in suction bottle
  • 0.2 μm PTFE hydrophobic disc filter between suction bottle and pump prevents medium from flowing into the pump
  • oil free, maintenance free, low noise
  • fittings and suction bottle autoclavable
  • CE certified
Support screen stainless steel for VF2/11 LF32/33 - 00829 167100-31
Support screen stainless steel for VF2/11 LF32/33
Support screen, stainless steel for VF2/11 LF32/33
MCE membrane disc filter - 00829 167100-52
MCE membrane disc filter
MCE membrane disc filter GN-6 0.45um, PALL 66278 for MF3/5/3a/5a, Case = 200pcs.
Support base stainless steel - 00829 167103-60
Support base stainless steel
Support base, stainless steel, with spin-lock connection for VF2/11 LF32/33
Stainless steel funnel with spin-lock connection - 00829 167103-61
Stainless steel funnel with spin-lock connection
Stainless steel funnel 100ml, with spin-lock connection for VF2/LF32
Stainless steel funnel with spin-lock connection - 00829 167103-63
Stainless steel funnel with spin-lock connection
Stainless steel funnel 300ml, with spin-lock connection for LF33
1 From 3